The application of MBC for MDD is straightforward and remarkably simple to apply. There are several steps: 1) identify the population in need of treatment; 2) determine the appropriate treatment; 3) administer initial treatment and adjust treatment based upon patient response; and 4) sustain long-term monitoring and maintenance.
Step two: treatment selection
Following the evaluation of the range of treatment options available, once the decision has been made to pursue antidepressant medication treatment, an appropriate medication needs to be selected. While personalized medicine-based methods of selecting the correct starting medication(s) are being developed, the current strategy is based upon the patient’s treatment history and current clinical presentations. Anticipated effectiveness, tolerability, safety, and affordability are the primary driving forces behind treatment selection. Given the above factors, for treatment-naïve patients the first-line treatment is typically a generically available SSRI. When working with patients that have had one or more trials of an antidepressant agent, obtaining an accurate treatment history is essential. For a variety of reasons patients commonly inaccurately report having had one or more failed trials. The reason for this is quite simple: patients typically do not receive an adequate trial (<30% reduction in symptoms given an adequate dosage of medication for an adequate period of time) and assume that the medication was not effective, the only exception being for instances of intolerance (intolerance constitutes an immediate failed trial). The requirements for an adequate trial for the most common antidepressant agents in use are published elsewhere (
22). The typical strategy proceeds as follows: first, one or two trials with an SSRI; followed by a trial with an SNRI or bupropion. Always being mindful of how the specific side effect profile will affect the patient, for example, patients with comorbid diabetes may not be the best candidates for mirtazapine, given the associated weight gain. On the other hand, patients who are having difficulty maintaining weight may specifically benefit from mirtazapine over other treatment choices. In another example, patients with a history of eating disorders or a seizure disorder should not be given bupropion, but those with more vegetative symptoms of depression or SSRI-induced sexual dysfunction may show increased benefit.
In instances of partial response (>30% reduction in symptoms but failure to return to premorbid functioning), the addition of a second compatible agent is often the choice. In instances of SSRI partial response, the addition of bupropion is often the preferred choice. The treatment options described thus far are appropriate for both primary and specialty care physicians. When incorporating TCAs, MAOIs, or combinations of SNRIs and bupropion, psychiatric settings could offer a desirable context for treatment given potential safety concerns.
Step three: monitoring outcomes and adjusting medication
This is the heart of appropriately delivered MBC. In order to minimize the clinical burden, MBC can be accomplished by the patient providing ratings on self-rated instruments in the waiting room prior to seeing a clinician followed by a review by a clinician as utilized in standard lab results. The key word in this step is measurement, specifically, standardized measurements. In order to deliver MBC, it is necessary to measure: 1) depressive symptom severity, 2) tolerability, 3) adherence to antidepressant treatment, and 4) safety. These measurements are then incorporated in the clinician decision making process and should not be viewed as a substitute for clinical judgment.
There are a number of standardized measurement tools available to assess depressive severity, such as the Beck Depression Inventory (BDI) (
32), the 21-item BDI-II (
33), the 20-item Zung Depression Rating Scale (
34), the Carroll Rating Scale (CRS) (
35), the 9-item Patient Health Questionnaire-9 (PHQ-9) (
36), the 20-item Center for Epidemiologic Studies Depression Scale (CES-D) (
37), the 30-item Inventory of Depressive Symptomatology—Patient Self-Report (IDS
30-SR) (
38,
39), and the 16-item Quick Inventory of Depressive Symptomatology—Patient Self-Report (QIDS
16-SR) (
40,
41). One of these measures should be used to establish pretreatment severity, and the same measure used to track change in depressive severity over time.
Tolerability is typically evaluated using a measure such as the self-report Frequency, Intensity, and Burden of Side Effects Rating (FIBSER) (
42). A more comprehensive measure, such as the Systematic Assessment for Treatment Emergent Events-Specific Inquiry (SAFTEE-SI) (
43) (a 55-item self-report with items rated none, mild, moderate, or severe) is also available. Adherence may be evaluated with a standardized assessment such as the 2-item Patient Adherence Questionnaire (PAQ) (determines how many days the patient was noncompliant and the reason for deviating from the prescribed dose).
The final and most important aspect of MBC is the monitoring of patient safety. Several assessments to monitor antidepressant safety per FDA guidelines (
44) have been developed. The Concise Health Risk Tracking (CHRT) (
45) used 14 items (patient self report and/or clinician rated interview format) to classify suicidal ideation and behavior per the Columbia Classification Algorithm of Suicide Assessment (C-CASA) criteria (
46). The 14-item (patient self-report and/or clinician-rated interview format) Concise Associated Symptoms Tracking (CAST) scale (
47) evaluates symptoms associated with the antidepressant “activation syndrome” described by the FDA (
44). More elaborate clinician rated interviews such as the Columbia Suicide-Severity Rating Scale (C-SSRS) are also available.
With accurate assessments of depressive symptom severity, antidepressant tolerability, adherence to treatment, and safety in hand (and in the patient chart), clinicians are prepared to deliver MBC. The application of MBC to provide the patient with an adequate antidepressant trial (adequate dosage for adequate duration) is quite simple. This is accomplished by first evaluating safety and tolerability; if determined to be nonproblematic, the next step is to increase the medication (within FDA guidelines) roughly every 2 weeks until the patient has been titrated to a minimum therapeutic antidepressant dose (
22) or the patient achieves remission. Patients failing to remit may continue to have the dose increased at the clinician's discretion. Some clinicians may choose a more conservative approach and hold the patient at a minimally therapeutic dosage for up to 6 weeks to evaluate response before increasing the daily dose, while others may continue to increase the dose more aggressively. For example, during the STAR*D (
8) study, dosages were titrated as follows: patients scoring a 9 or above on the QIDS had the ADM dosage increased; for patients scoring in the 6 to 8 range, dosage increase was at the clinician’s discretion; and those achieving remission (QIDS <6) experienced no medication change. In clinical trials such as REVAMP (
29), in instances of intolerance or if patients failed to respond to an adequate antidepressant trial (<30% reduction in depressive symptoms), medications were switched to the next antidepressant in the series described above. Additionally, in instances of partial response (patients experienced >30% reduction in symptoms but failed to return to achieve remission), a second antidepressant agent was added. The second agent was taken from a different class of antidepressants (e.g., sertraline augmented with bupropion). While augmentation strategies typically employ the use of a second antidepressant agent, the use of other agents, such as thyroid supplements, atypical antipsychotics, mood stabilizers, and psychostimulants are also accepted clinical practice. Detailed descriptions of these options are available in the current APA Guidelines for MDD.
Step four: long-term monitoring and maintenance
Once a patient has been stabilized at maximal antidepressant treatment response, monitoring and assessment visits become less frequent. It should be noted that remission and return to premorbid functioning are the goal of treatment. The prognosis for those stabilized, having not reached remission, is significantly worse as manifested by more frequent relapse and recurrence, and by definition, overall lower levels of social and occupational functioning. During this phase of treatment two questions often occur: 1) what to do if the antidepressant stops working effectively; and 2) after sustained remission, when should the antidepressant be discontinued. An understating of the environmental factors may be helpful in making treatment decisions. In the first instance, if patients are exposed to significant psychosocial stressors that are fleeting in nature, it may be appropriate to make no change or temporarily use an augmenting agent. If the stressors are more profoundly enduring, closer monitoring and a return to the augmentation and/or switch strategy described above may be in order. In the second case, if the environmental factors appear to be stable, discontinuation may occur 6 months to as much as 2 years after remission has been achieved, depending upon the patient’s history of depression (i.e., number of previous episodes, length of current episode, and overall length of illness). Patients should be monitored more closely for relapse and recurrence and safety, as well as all instances when dosages are titrated.